Far Out Flora

DIY Succulent Pallet Table

June 4, 2011 by Matti | 251 Comments

Max with the new Succulent Table.

Max with the new Succulent Table.

Can you believe that our latest DIY project was once just a couple of junky pallets and some scrappy table legs?  Crazy…if I didn’t have photos, I wouldn’t believe it myself.  Not too long ago, we whipped out a coffee table sized succulent table out of an old shipping crate.  Now we scaled it up.

The pallets.

The pallets.

First bit of advice, deconstructing pallets are a big pain unless you have the right tools…and our hammer and wall scrapper wasn’t quite doing the trick.  Boards were cracking and splitting left and right.  Good news.  We had three pallets to figure out how to do it, and by the second one…we were getting usable boards.

Couple good planks.

Couple good planks.

Love the scares of time left on these chunks of pallet wood.

Attaching the legs.

Attaching the legs.

After pulling apart two pallets, we used the 2 x 4 sized boards to make a rectangular frame to attached the appropriated table legs.  Debate went back and forth whether or not to strip the paint off the legs…we’re not huge fans of washed out creamy yellow.  We ended up just leaving them dinged up how we found them.  In the end, it worked in our favor.

Dry run for fittings.

Dry run for fittings.

Like TV magic (and 2 days later), the table was more or less put together.  We got so into the project that we forgot to take some pics during the building of the succulent hole, oops.  Basically, the top is made up in three sections.  Two flat boards make the right side, three boards make the left.  The center three boards were built as a separate planting box…again all using parts of the pallet.  We made it this way because we knew the succulent table was going to journey about 45 minutes south to Sunset Test Garden.  The plan was to make the succulent section removable so that it could ride inside the car while the rest of the table may need to be strapped to the roof of the Subaru.

Megan with some semps.

Megan with some semps.

After a weekend of slivers and sweat, we finally got to plant this baby.  Megan had the pleasure to do the ceremonial dividing up of the first bunch of semps.

Getting messy.

Getting messy.

3/8 inch holes where drilled in the bottom, and we decided to go with a fast draining cactus mix.  The bulk of the plants are Sempervivum, Sedum, and a hint of Orostachys iwarenge.  We plugged in some pea sized pebbles to stabilize and dress up the top.

Packing them in.

Packing them in.

Yeah, we didn’t hold back on jamming them.  By all means, it would be fine to plant the strip thin and let it grow in.  But when you need it to look full fast…you just hold, tuck and stick until it looks more or less done.

Succulents playing together.

Succulents playing together.

 

Finishing touches.

Finishing touches.

Here you can get a sense of how the center box is separate from the rest of the table…great for traveling.

Ready for action.

Ready for action.

Speaking of journeys, this guy is on view Jun 4-5 at the Sunset Magazine Celebration Weekend in their Test Garden down in Menlo Park, CA.  While your there, say hi to Johanna Silver, aka Ask a Garden Girl and Sunset Test Guru.  She has rock star garden skills and one of the most engaging personalities you’ll find.

Hey, you can stay up-to-date with us on Facebook or place an ad.  We have super low intro pricing right now.

– Far Out Flora

 

Square Hangy Thing

May 18, 2011 by Matti | 21 Comments

Complete, and will take some time to grow roots.

This is how it looked back then.

Almost a year ago, I planted this metal pot rack into a succulent hanging thing. Lots of little cuttings, lots of sphagnum moss, lots of potential. Well, it’s all grown up now. Not exactly what I expected, but enough to salvage.

Here's what it looks like now.

Here

Here it is today. It has been neglected for some time now.  Definitively in need of a haircut and a little refill. Oh, another issue I have found. That hemp type twine I’ve been using to hold it all together? It has been failing…basically rotting away a little faster than expected. Like the time the mirror held up with the twine fell and crushed our Clianthus puniceus. I wasn’t too concerned at that moment because I really didn’t know what Megan planted, but I love the guy now that he has recovered.

Ever since, I’ve been systematically going around the garden and replacing that hemp twine with wire. At least it should take more than a year before the wire rusts away.

A little fluffing.

A little fluffing.

A little fluffing and it’s looking sweet again, better than ever.

Looking sweet again.

Looking sweet again.

I can’t wait for another 3-6 months to pass to see what happens next. Hey, these succulents are all alive and need the occasional haircut / TLC to get them looking all cool again. Same thing with our planted containers.

Excited that we made it.

Be somebody.

While I was spicing up this succulent hanging thing, Megan picked up this cool Petunia hybrid, the Phantom Petunia. Turns out it was the same Petunia on the cover of the Garden Gate magazine that showed up that day. No way!

Time for an obscure reference. Holding this plant along with the magazine instantly reminded me of a certain movie where Steve Martin held up a drink with a bamboo umbrella next to a magazine stating…”Be somebody”. Yeah, that Petunia made me feel like Somebody. Any takers on the movie? – Far Out Flora

February 4, 2011
by Matti
78 Comments

DIY Succulent Table

Mission DIY succulent table complete.  I’ve wanted to make this baby for months.  It’s a dissected old shipping crate and some other random scraps of wood lying around the house turned into a patio side table with a planting strip … Continue reading

July 13, 2010
by Megan
4 Comments

Building REsources Rules

Are you a DIY Gardener looking for unusual objects to add to your garden?  Have a strong attraction to rusty and shiny objects?  Then head over to Building REsources, San Francisco’s true Reduce, Reuse, Recycle place that caters to the … Continue reading